icon

[Corinth Object] L 803: LAMP TYPE XXVIII

Lamp Type XXVIII. Handle with hole begun on each side but not bored through. Pinkish brown glaze. Nozzle with single groove on each side; handle with double groove. Rim divided by groove into two bands: ...

icon

[Corinth Object] L 819: LAMP BRONEER TYPE VI

Lamp with disk foot, deeply concave undersurface, vertical body, broad flat rim, slanting toward moderate fill hole; floor slightly humped. Pale yellow clay. WM

icon

[Corinth Object] L 820: LAMP BRONEER TYPE VIII

Deep body with nearly vertical sides; broad flat rim with a groove at the outer edge, the rim nearly covers the top; no handle, but a perforated lug on the left side; high, narrow base. Red slip on the ...

icon

[Corinth Object] L 822: LAMP BRONEER TYPE VII

Curving sides; wide flat rim with a groove near the outer edge; long nozzle; no handle; raised base. Good black glaze, except on the base and in the groove on the rim. Red clay Missing parts. The lef side ...

icon

[Corinth Object] L 823: LAMP BRONEER TYPE VII

Lamp with disk foot, concave undersurfvace, deep globular body, groove articulating narrow downturned rim from body, start of nozzle, flat on top. Red to black glaze over all. Fine buff clay fired to bright ... 4th to early 3rd c.. B.C.

icon

[Corinth Object] L 825: LAMP BRONEER TYPE IX

Lamp with concave bottom, watch-shaped body: lower body straight flaring to H00.018, upper half contracting to broad groove, articulating broad horizontal rim with convex profile. Unpierced lug to lt ... Hellenistic

icon

[Corinth Object] L 828: LAMP BRONEER TYPE XI

Double convex shape; groove around the filling hole; solid knob on the left side. Red glaze. Red clay. Missing parts. Handle and nozzle broken away. WM

icon

[Corinth Object] L 829: LAMP BRONEER TYPE XI

Double convex shape; wick-hole at some distance from the end of the nozzle; ribbed vertical handle; solid knob on the left side. Dark brown clay. Reddish buff clay. Missing parts. End of the nozzle is ...

icon

[Corinth Object] L 830: LAMP BRONEER TYPE XI

Double convex shape; solid knob on the left side. Red glaze. Red clay. Missing parts. Handle and end of nozzle missing.

icon

[Corinth Object] L 831: LAMP BRONEER TYPE XI

Double convex shape; long, pointed nozzle; solid knob on the left side. Traces of red glaze. Soft, red clay. Missing parts. Handle missing. WM

icon

[Corinth Object] L 832: LAMP BRONEER TYPE XI

Double convex shape; long, pointed nozzle; solid knob on the left side. Dark gray, metallic glaze. Greenish buff clay. Missing parts. Handle and end of nozzle broken away. WM

icon

[Corinth Object] L 833: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, no collar but low plastic ring surrounding flat disk with slight lip around small fill hole. Long nozzle, round in section with flanges from mould on side, flaring ... 1st c.

icon

[Corinth Object] L 835: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, no collar but low narrow plastic ring surrounded concave disk with slight lip around small fill hole. Long nozzle, round in section with mould flanges on sides; vertical ... 1st c.

icon

[Corinth Object] L 839: LAMP BRONEER TYPE XIX

Lamp with flat bottom, sharply biconical body, flaring collar rim, narrow disk with raised ring around small fill hole. Start of nozzle. Vertical strap handle attached to max. diam. and rim. Relief decoration ... 1st c.

icon

[Corinth Object] L 841: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, collar rim, broad flat disk with small fill hole. Vertical strap handle attached to upper body. Relief decoration on upper body: row of globules above which ovules ... 1st c.

icon

[Corinth Object] L 842: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, vertical collar rim slightly deformed by handle, broad flat disk, small fill hole. Long nozzle, round in section with mould flanges on side. Vertical ridge handle ... 1st c.

icon

[Corinth Object] L 846: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, flaring thick collar rim, flat disk with 2 small holes, small fill hole. Start of nozzle, round in section. Vertical strap handle attached to upper body and rim ... 1st c.