|
|
| Deep bowl. Small ring base. Convex body straightens mid-body to tall outward flaring rim; two horizontal round handles, attached 1/3 of way down body. FS 284. Exterior has three bands, one painted band ... based on Rutter and MDP |
| Deep bowl. Ring base. Slightly echinoid body. Small outturned flaring rim. Two horizontal round handles attached 1/3 of way down body. FS 284. Three horizontal bands on exterior, one at base that over ... based on Rutter and MDP |
| Deep Bowl. Ring base. Slightly echinoid body rising to high outturned flaring rim. Two small round horizontal handles attached about 1/3 of way down body. FS 284 Exterior has three bands: one at base, ... based on Rutter and MDP |
| Deep Bowl. Small low ring base. Convex body straightens to slightly outturned flaring rim. Two round horizontal handles attached 1/3 of way down body. FS 284. Exterior is polished buff with six painted ... based on Rutter and MDP |
| Deep Bowl. Low ring base. Convex body straightens to small outward flaring rim. Two round horizontal handles attach 1/3 of way down body. FS 284; MDP Group A. Exterior has slipped and polished surface ... date based on MDP and Rutter 1974 |
| Deep Bowl. Shallow raised ring foot. Ovoid body to almost vertical rim. Two horizontal round handles. FS 284, Group A. Exterior has three painted horizontal bands: one at base, one at mid-body and a thin ... LH IIIB-C Early; general shape and decoration are likely LH IIIB but could continue into LH IIIC Early |
| Deep Bowl. Shallow ring base. Slightly globular body to large outturned flaring rim. Two round horizontal handles attached 1/3 of way down body. FS 284, Group A. Exterior has dully polished surface and ... Rutter 1974 pp. 129-130 suggests a late LH IIIB2 date, but could be LH IIIC Early |
| Deep Bowl. Shallow ring base. Convex body straightens to slightly outturned flaring rim. Two round horizontal handles attached 1/3 of way down body. FS 284, Group A. Exterior has polished surface with ... date based on Rutter |
| Deep Bowl. Ring base of medium depth. Deep convex or bell shaped body, slightly flaring lip. Two horizontal round handles attached 1/3 of way down body. FS 284 Exterior has one band at junction of foot ... LH IIIB or LH IIIC Early - Rutter |
| Krater. Flat slightly concave base. Convex body straightens to outward thickening squared rim. Two large horizontal handles attached below rim. FS 281 or 282. Exterior polished with banded decoration ... Furumark and MDP date for Pictorial Style |
| Kylix. Virtually flat foot with deep hemispherical sinking under stem. Tall stem tapering from top to bottom. Shallow conical bowl with slightly inverted lipless rim. Two vertical strap handle from rim ... based on Rutter's identification of it as FS 275, and redating of Furumark's LH IIIC1:late |
| Kylix. Foot hollowed, made as disk, and added to flat bottomed stem, top of base almost vertical. Tall stem. Shallow conical bowl to vertical lipless rim. Two vertical flattened strap handles attached ... 1915/06/12 |
| Kylix. Base is thin and hallowed with deep hemispherical sinking under stem. Tall stem, faintly ribbed and tapers from top to bottom. Conical body. Two vertical flattened handles attached at mid-body ... 1915/06/12 |
| Kylix. Base and stem not preserved. Body conical, slightly flaring rim. Two small vertical flattened handles from rim to center of body. FS 275 Exterior slipped and polished. Reserved band on stem, lower ... 1915/06/12 |
| Kylix. Small base, slightly hollowed with very deep circular depression in center. Depression is pierced by sharp instrument. Short stem tapering from top to bottom, relatively deep and slightly rounded ... 1915/06/12 |
| Carinated cup (FS 240). Ring base, carinated body; rim and carination diameter the same. Very tall outturned lip. No handles. Exterior slipped and polished, painted solid above carination, interior ... 1915/06/12
1915/06/11 |
| Shallow angular bowl (FS 295). Small flat base, slightly concave, carinated body rises to medium tall outturned rim, 1 horizontal flattened pinched handle attached just below rim. Exterior slipped and ... 1915/06/12 |
| Carinated cup (FS 240). Ring base, carinated body; rim and carination diameter the same. Very tall outturned lip. No handles. Exterior slipped and polished, painted above carination; interior painted ... 1915/06/05
1915/06/14 |
Carinated cup with 1 high handle. According to pottery notebook, similar in shape to CP 116 (=FS 240). Painted red, monochrome. Complete or intact. pot missing WM "P I" in Corinth Pottery Inventory I ... based on description of shape in pottery notebook; vessel lost |
| Small jug (FS 65). Flat raised base, globular body to short concave neck, tall outturned rim. 1 vertical strap handle from rim to widest diameter. Smoothed. Very coarse gritty clay Complete profile ... LH IIB-IIIC based on FS |
| Stirrup jar (FS 175). Globular body, slightly rounded shoulder. 1 vertical strap handle. Spout tall, slightly flaring, outward thickening rim slightly flaring. Exterior surface slipped and polished ... 1915/06/11
1915/06/12 |
| Feeding bottle (FS 162). Small shallow ring base, globular body, tall slender neck with small upturned rim; neck is placed asymmetrically on body. Large strap basket handle, both ends attached to rim ... LH IIIB-C |
| Basin (FS 294). Large shallow ring base, convex body to squared rim slightly outward thickened, very inward thickened. Two horizontal handles oval in section attached on rim. Exterior slipped and polished, ... 1915/06/11
1915/06/12 |
| Basin (FS 294). Flat concave base (almost a ring base), convex body to squared rim, outward thickened and slightly inward thickened. Two horizontal round handles attached at rim. Exterior slipped and ... 1915/06/11
1915/06/12 |
| Shallow basin. Large shallow ring base. Convex body to square and downturned outward thickened rim. Two horizontal handles attached at rim. FS 294 Exterior slipped and polished, one painted band around ... based on Rutter and MDP |
| Krater. Flat base slightly concave. Convex body to square outward thickened rim. Very thick walls. FS 282 Exterior slipped and polished with painted bands. Two bands at base, two bands between base and ... date based on presence of decoration - pictorial style |
| Hydria. Flat slightly concave base. Globular body, tall slightly flaring neck, thick outturned rim slightly downturned. One horizontal round handle attached at midpoint of body. One vertical strap handle ... based on MDP and Rutter |
| Hydria. Base very slightly raised. Globular body, rounded shoulder. Tall narrow neck; sligtly flaring rim, outward thickened. Two horizontal round handles attached at maximum diameter. One vertical strap ... 1915/06/12
1915/06/11 |
| Hydria. Curving shoulder to tall narrow neck with slight ledge at base, outturned rim. One vertical strap handle from neck well below rim to shoulder. Attachments for a horizontal handle at midpoint of ... LH IIIB-C |
| Small pithos. Flat base, ovoid body; Max diameter is at 2/3 way up, then body turns in slightly. Vertical rim. No handles. Raised ridge just below rim with short oblique incised lines- sort of rope pattern ... |
| Small one-handled goblet. Base is concave with a hollowed center where there is a dep circular depression. Very short stem. Round or ovoid body with a short outturned flaring rim. One vertical strap handle ... LH I-II |
| Small tankard. Lower half of body globular, upper half almost cylindrical but flares to slightly rounded flaring lip.Two vertical handles. Similar to Lerna III tankard form 2 type 1 (p. 279-281) Lower ... EH III early, contemporary with EH III phase I at Lerna |
| Small Pyxis. Flat base, squat globular body. Very short wide neck and rounded outturned lip. Lip pierced with two holes just above one handle. Two small horizontal lug handles at widest part of body, each ... EH III |
| Sauceboat. Small ring base. Slightly ovoid body reaches maximum diameter beneath midpoint. Vertical tapered lip. Long high spout (although is restored). One veticla flattened handle with a groove down ... EH IIA late, cf. Lerna III (phase C late) in Lerna IV, vol 2 |
| Carinated cup (FS 240). Small ring base. Carinated body rises to tall tapered outturned lip. One vertical strap handle, high swung from top of rim to mid-body. Exterior is slipped and polished. Lower body ... based on Rutter |
Small pithos coarse reddish gray clay with common large subrounded spherical stone inclusions, frequent large voids Fragment. c. 11 joining fragments preserve c. 1/10 of body HM no findspot recorded on ... based on context |
Large pithos Two raised rope bands around body. thick coarse ware Fragment. some of body, bottom missing; as of 1970 CP 137 is lost. Stored in Old Epigraphikon. HM "round hearth L" in Corinth Pottery ... unknown |
| Juglet. Flat slightly concave base, globular body, short narrow neck, rounded outturned rim. One vertical round handle from rim to shoulder. FS 115 Exterior is smoothed and coated with a red wash. coarse ... Rutter based on context |
| Deep Bowl. Small ring base. Convex body rises to slightly outward flaring lip. Two horizontal round handles attached 1/3 of way down body. FS 285 Exterior is slipped and polished with painted decoration ... based on redating of Furumark in MDP and Rutter 1974 |
| Cup with solid base, slightly hollowed on interior, with flaring profile; ovoid body with straight flaring profile, max. diam. ca. 00.045; narrow flaring rim with rounded lip, deformed by handles. 2 vertical ... Late Mycenaean II (?) |
| Small round bowl with spout and basket handle. Small raised foot, slightly hollowed. Body squat piriform. Neck very wide and short vertical rim, flat on top. Small but long bridge spout attached on neck ... date from Furumark |
| Small jug. High conical flat base, slightly hollowed. Globular body, short neck with a fairly wide outturned squared rim. One vertical round handle from rim to maximum diameter. FS 25 #112 Exterior slipped ... date based on Furumark 1941A |
| Small alabastron. Flat base, squat rounded body, short narrow neck, horizontal rim. Three small horizontal round handles on shoulder. FS 84 Exterior slipped and painted. Two parallel lines around base, ... based on Furumark form |
| Askos. Flattened oval base. Globular body resembles that of a bird, rounded and coming ot a point at the tail, where the head should be there is a round open spout. Strap basket handle attached at back ... based on MDP |
| Two handled goblet. Short stem and flaring foot, hollow base has a deep circular depression in the center. Echimoid body rises to outturned rounded flaring rim. Two vertical strap handles from rim to ... based on MDP |
| Jug with cutaway neck. Small flat base, body globular biconical. Fairly narrow neck, cutaway spout. One vertical round handle from back of spout to point of max. diameter. Slight ridge where neck and body ... based on Furumark form |
| Small Ephyraean goblet. Rounded body with small offset rim; vertical strap handles attached at rim and body. Furumark shape 79, #254 of LH IIB Thick, shiny buff slip, inside and outl decoration in lustrous ... 1916/06/24
1916/06/24 |
| Low bowl (alabastron shaped). Flat base. Body rounded, squat globular, short flaring neck and flaring rim. Handle restored as vertical, flat handle running from shoulder to widest diameter. Furumark shape ... 1916/07/27
1916/06/26
1916/07/26
1916/07/27
1916/06/24 |
| Rounded alabastron. Ovoid body to flat base. Low neck with high outturned rim. Three horizontal round handles on shoulder. FS 83 Exterior is slipped and painted. Lustrous buff slip only on exterior; handles, ... based on MDP and Furumark |
| Squat Jug. Globular body, short narrow neck and outward flaring rim. One vertical strap handle attached on shoulderand just above maximum diameter. FS 87 Exterior slipped and painted. Band below decorative ... based on FM |
| Goblet with narrow stem Diam. 0.022, straight flaring ovoid body with max. diam. at ca. 0.035 m. below lip, narrow straight flaring rim, projecting no further than body. Two vertical strap handles attached ... LH IIA |
| Boblet. Flaring foot with hollowed base and a deep depression in the center, short stem. Convex body to small outturned flaring lip. One vertical handle, probably flat (missing). FS 254 Exterior slipped ... date based on MDP |
| Goblet. Carinated body to slightly outturned rim. One vertical strap handle attached at rim and point of carination. FS 261 Exterior is slipped and painted. Thick band at bottom of body (possibly covered ... LH I - based on Furumark |
| Small jug. Flat base, squat globular body. One vertical strap handle with a groove in center attached at maximum diameter. FS 112? Exterior is painted in entirely in red with decoration in white. One band ... LH I according to Davis 1979 p. 240 |
| Small cup. Crudely worked flat base. Globular body to small outward flaring rounded lip. Two vertical strap handles attached at rim and widest point of body. Rim is slightly pushed in where handles attached ... 1916/06/30
1916/06/30 |
| Miniature jug. Flat base, squat ovoid body, sloping shoulder and slightly rounded vertical lip. One vertical strap handle from rim to shoulder. FS 112 or 114 Exterior is slipped and painted. One band at ... possibly LH III based on FS |
| Jug with cutaway neck. Flat disk base, globular body, narrow neck with outturned lip at spout. One vertical strap handle from bottom of cutaway neck to shoulder. FS 135 Exterior slipped and painted. One ... LH II based on FS and decoration |
| Goblet. Base slighlty hollowed with a depression in center. Short thick stem, convex body, short outturned rim. One vertical strap handle from rim to center of body. FS 254 Exteriorr is slipped and painted ... based on MDP |
| Semi-globular cup. Slightly carinated body, small outturned flaring lip. One vertical strap handle attached at rim and center of body. FS 211 or 212
Stem entirely and incorrectly restored Exterior is ... based on FS and FM |
| Vapheio cup. Flat base, nearly cylindrical lower body with a raised ridge 1/3 of the way up body, flaring upper body with relatively straight sides. One small vertical strap handle from rim to 1/3 of way ... date based on FS in MDP |
| Vapheio cup. Flat base, lower body almost cylindrical, upper body is rounded and flaring, vertical tapered lip. One vertical handle attached at rim and 1/3 of way down body. Rim is slightly pressed inward ... based on shape, but could be LH I because of unslipped interior |
| Vapheio cup. Flat base, lower body cylindrical but flares slightly to ridge at mid-body, upper body flaring to tapered slightly outturned lip. One vertical handle attached at rim and above ridge. FS 224 ... based on form and decoration |
| Cup with flat bottom, body contracting slightly then flaring with nearly straight profile to rounded lip. Vertical strap handle attached from upper body to lip. FS 224 type 3 Dull red-brown paint: bottom: ... 1916/06/26
1916/06/26 |
| Cup of Vaphio shape (FS 224). Flat base. Lower part of body almost cylindrical, upper part conical. Vertical rim. One vertical strap handle attached at rim and body, ca. 1/3 of way down. No ridge in the ... 1916/06/26
1916/06/24 |
| Goblet. Short stem to rounded flaring lip. One vertical strap handle. FS 254 Exterior and interior are slipped Hard clay Fragment. 1 fragment preserves 1/2 of foot, 85% of body, 80% of rim, one lower handle ... LH IIA or B, same shape as Ephyraean goblet |
| Conical cup. Flat base with traces of wheel marks, finger prints and a small dab of extra clay. Body risesi n a continuous curve to vertical lip. FS 204 Undecorated Hard green buff clay Complete or intact ... FS dates to LH I-LH IIIA |
| Semi-globular cup. Flat slightly raised base, globular body to outward flaring lip. One small thin vertical strap handle from rim to midbody. FS 215, similar to MDP fig 183 no. 1 Exterior slipped and polished ... Or transitional LH IIIB-C early according to Rutter 1974, p. 412 |
| Deep bowl group A (FS 285) with vertical ring foot, flat undersurface, flat resting surface, pared exterior face of foot, ovoid body with maximum diameter above the median of the body, becomes vertical ... Based on Rutter 1974 and RMDP. |
| Based Askos. Shallow ring base, globular body with rounded shoulder. One vertical flattened handle attached at center of rim of pot and slightly down shoulder. Spout hole on axis of handle. FS 195 Exterior ... LH IIIB, based on Rutter 1974 |
| Small cup. Tiny crudely made ring base. Tall offset rim. One small vertical strap handle from rim of top of body. Buff slip. Decoration in brown and purple paint, lustrous (brown paint originally black) ... 1916/07/08 |
| Small aryballos. Slightly flattened base, globular body, thin small neck, large flat rim which overhangs neck. Tiny mouth. One tiny vertical strap handle from rim to sholder. Gray buff slip. Decoration ... Archaic? |
| Bowl or saucer with incurved rim. Ring base, conical body, rounded inturned lip. Fine hard clay Complete profile. 4 joining fragments preserve 1/2 of base, 1/2 of body, 1/2 of rim HM "E.A. XIX" in pencil ... EH II - in Lerna vol. IV p. 599 as a parallel to a Lerna III type 2 saucer |
| Bowl or saucer with incurved rim. Tiny "ring base", conical body, large rounded inturned lip. Semi-coarse gritty clay Complete profile. 7 joining fragments preserve all of base, 95% of body and rim HM ... EH II - similar to Lerna III type 2 saucer (Lerna Vol. IV.II, p. 596) |
| Bowl or saucer with incurved rim. Small ring base, conical body, rounded vertical lip. Very uneven lip. Griity clay, semi-fine Complete profile. 3 joining fragments preserve all of base, all of body, ... EH II?, based on context? |
| Bowl or saucer with slightly incurved rim. Crude flat base, conical body, rounded slightly inturning lip. Exterior polished. Coarse gritty clay Complete profile. 9 joining fragments preserve 3/4 of base, ... based on context? |
| Goblet. Flaring foot hollowed in center, short stem convex body, short flaring lip. One vertical strap handle from rim to widest diameter. Rim slightly pushed in where handle attached. FS 254, sim to MDP ... date based on similarity to MDP fig. 35 no. 1 |
| Goblet with false ring foot with vertical profile, pared on undersurface to simulate ring foot. Straight flaring body to carination at H00.06-00.068, narrow inturned shoulder, flaring rim with slight convex ... Middle Helladic |
| Small Grey Minyan cup or bowl. Flat base, carinated body largest at midpoint of body, tapered flaring lip. Handles attached at rim and midpoint of body. Medium fine clay, somewhat gritty Complete profile ... 1916/07/03 |
| Grey Minyan Bowl. Flat base, globular body, high tapered flaring lip. Short wide vertical strap handle from below rim to 1/3of way down body (probably two originally). Handle almost have a groove down ... 1916/07/11 |
| Beaked jug. Flat base, globular body with sloping shoulder and slightly flaring neck. Inside can see where neck added on to body it is lumpy - obviously clay for neck added and smoothed on already thrown ... 1916/06/27 |
| Breasted jug. Wide body. Shoulder under spout has small breast-like protrusions. Spout probably cutaway. One vertical strap handle from back of spout to maximum diameter of body. Buck (Hesp. 1964) shape ... based on Davis 1979 |
| Sauceboat. Small ring base, deep hemispherical body. Short spout rises slightly. One horizontal handle attached at back, triangular in section. Exterior painted with Urfirnis, except the bottom of base ... EH II - reference in Lerna vol. IV.II, p.586 to this vessel as a Type 1 sauceboat (Lerna III phase A or B) |
| Tankard. Ovoid body reaches max. diameter just above base, body tapers to large outturned lip. Large vertical strap handle attached at point of max. diameter. Exterior slipped and painted. Lower set of ... EH III - Lerna IV shape III.2 (medium); Lerna vol. III p. 286 |
| Squat Alabastron. Large flat base, squat rounded body, very low narrow neck with outturned rum. Three round horizontal handles (two remain) attahcd on sloping shoulder. FS 83 Exterior slipped and painted ... based on motif and shape |
| Small jug or jar. Flat base, globular budy. Fairly tall neck; flaring rim; flattened on top. No handle Thick creamy buff slip. Decoration in fine, lustrous brown paint. Neck and rim coated inside and out ... 1916/09/23 |
| Ring handled cup. Small shallow ring base. Shallow convex body to horizontal rim. FS 237 Exterior slipped and painted. Band at rim. Interior slipped and painted. Base has two concentric circles then a ... shape dates to LH I-LH IIIA, motif LH IIB-LH IIIA |
| Saucer. Slightly flattened base, shallow spreading body, slightly outturned rim, almost horizontal. FS 237? (but no base) Exterior slipped and painted. Band around base, traces of a curved vertical stripe ... based on context |
| Conical cup. Large flat base, conical body, vertical lip. Very uneven rim. FS 204 Slight groove on outside just below lip. Fine hard clay Complete profile. 5 joining fragments preserve all of base, 80% ... based on shape |
| Semiglobular cup. Slightly raised flat base, semi-globular body rises to rounded flaring lip. FS 212 Exterior slipped and painted. Base and part of lower body painted solid. One band at midbody below decorative ... 1916/06/23
1916/06/23 |
| Large Jug. Globular body, orunded shoulder, short narrow flaring neck with outturned lip. One large strap handle attached from rim to max. diameter. FS 109 Exterior slipped. Handle has slight grooves along ... based on Furumark |
| Minyan Bowl. Flat base, slightly raised, slightly flaring; body ovoid; small smightly offset rim; Two horizontal pierced lug handles attached at point of maximum diameter. Surface is slipped and burnished ... 1916 |
| Stirrup Jar. Globular body, rounded shoulder, small tube-like spout. Narrow vertical oval strap handle and false spout. FS 167 or 173. Exterior slipped and painted. On upper body, a pair of thick bands ... advanced LH IIIB or early LH IIIC (Rutter 1974 p. 378) |
| Jug (FS 65). Flat base, slightly concave, globular body, tall outturned lip. One broad vertical strap handle from rim to widest diameter. Exterior smoothed. Coarse, gritty clay with numerous large inclusions ... LH IIIC, based on Rutter |
| Strainer. Flat base pierced with fourteen holes, roughly cylindrical body, straight lip. Heavy round horizontal loop handle attached to one side of lip. Very gritty coarse clay Complete or intact. Intact ... based on context |
| Goblet with wide flaring foot with projecting ridge around upper circumference; short narrow stem, slightly hollowed; body with plump ovoid profile, max. diam. at 00.10; narrow straight flaring rim, round ... LH I, based on Furumark |
| Semiglobular cup. Small flat disk base slightly concave. Globular body, slightly flaring lip. One vertical round strap handle from rim to midpoint of body. FS-212. Exterior slipped and painted. One thick ... LH IIA-B, based on motif and shape |
| Ladle. Hemispherical body, small outturned lip. One very high swung ribbon handle from rim to widest diameter. Exterior is slipped. Fine clay Complete profile. three joining fragments preserve2/3 base, ... 1916/06/27
1916/06/29 |
| Ladle. Globular body rises to small outturned lip. One vertical strap handle. Exterior is slipped. Hard fine clay Fragment. three joining fragments preserve 1/2 body, 3/4 rim HM "EA X" in pencil on vessel ... 1916/06/29
1916/06/27 |
| Ladle. Globular body rises to outturned lip. One vertical, extremely high swung, strap handle from rim to widest diameter. Handle narrows towards base. Fine clay Fragment. four joining fragments preserve ... 1916/06/27
1916/06/29 |
| Goblet. Flat spreading foot, slightly hollowed underneath, short solid stem, hemispherical body, small outturned lip. One vertical strap handle attached at rim (and probably body). FS 263 or 254 (Ephyraean ... 1916/06/27
1916/06/29 |
|
|
