|
|
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
| Lamp with convex body curving in to oblique rim surrounding large fill hole; circular nozzle tilted upward like scoop and rising above rim with large wick hole set obliquely. Dull black glaze on nozzle ... 1930/04/12 |
| Lamp with squat convex body, curving in very slightly to flat narrow rim that slants slightly down and overhangs interior; large fill hole. Horizontal lug handle, rectangular in plan, thin strap in section ... 1930/04/12 |
| Lamp with shallow convex body, offset flat rim that projects slightly on exterior and overhangs interior. Horizontal lug handle with horizontal strap handle, set vertically, at base of lug. Black glaze ... 1st quarter 6th c. B.C. |
Lamp with squat convex body, curving in horizontally to rim; long nozzle, flat on top with rounded tip and slight flukes; large wick hole at tip. Generally as Broneer IX-XI. Black glaze over all, inside ... 1929;1931 |
| Lamp with flat base, ovoid body, curving in to outward thickened flat narrow rim. Base of nozzle and wick hole. Scar of probable horizontal lug handle opposite nozzle. Carelessly finished, adhering pellets ... 1st half 6th c. B.C. |
Lamp with slightly concave bottom, articulated by groove, wide flaring body with slight convex profile, flaring rim with flat thick lip, pulled out on side of lamp, pulled up vertically and pinched to ... late 7th-early 6th c. BCE |
| Lamp with flat bottom, ovoid body, curving in to articulated broad flat rim that only slightly overhangs exterior, overhangs interior. Horizontal lug handle attached to body and rim. P.Q. type IA4. Black ... 1st half 6th c. B.C. |
| Lamp with flat, string-cut base, wide flaring body, continuing into flaring rim turned out on side and back, and pulled up vertically to right of nozzle; rim sharply articulated from body on interior ... late 7th-early 6th c. |
| Lamp with squat globular body, flat rim set well in from max. projection of body. Rim narrow, projecting slightly from body and overhanging interior. Large fill hole. Long, solid horizontal handle, roughly ... 1931/05;1933/11 |
| Lamp with bottom curving up into vertical body, broad flat rim, projecting slightly beyond body and slanting down to moderate fill hole; large nozzle with large wick hole that impinges slightly on rim ... 2nd half 6th c. to 480 BCE |
| Lamp with vertical ring foot, convex undersurface, globular body curving in to narrow rim with plastic ring and thin flat lip surrounding large fill hole. Stump of nozzle. Horizontal loop handle set on ... late 3rd to 4th quarter 5th c. BCE |
Lamp (?) with deep vertical body curving without break into very broad overhanging rim, curves down slightly to very small fill hole; vertical stap handle attached to upper body; rough clay surrounding ... 1929;1931 |
Standed lamp with cylindrical, hollow stand, flaring body with echinoid profile, flat floor; start of flare for nozzle at one end, thickening for probable vertical handle at opposite end. Exact type of ... 1931 |
| Lamp with flat base, globular body continuing into incurving rim with horizontal lip; large fill hole. Large nozzle, tilted up above level of rim, with large wick hole that impinges on rim. Paring marks ... 6th or 5th c. B.C. |
| Lamp with low disk foot with concave undersurface, shallow convex body, broad horizontal rim, overhanging interior and tapering to lip of large fill hole. Horizontal loop handle set on upper body. Single ... late 3rd to 4th quarter 5th c. B.C. |
| Lamp with flaring ring foot, globular body, projection of which equals that of foot, inset and articulated broad flat rim, slopes down to moderate fill hole; base of large nozzle and wick hole that touches ... late 7th-1st half 6th BC |
| Lamp with concave bottom, squat globular body, curving in to narrow flat rim, slanting down to large fill hole. Horizontal lug handle, sqare in plan, from which rises second strap handle set vertically ... 6th c. BCE |
| Lamp with slightly concave bottom, echinoid body curving in to broad horizontal rim with raised lip around large fill hole. Vertical strap (?) handle attached to top and bottom of body opposite nozzle ... 1931 |
| Lamp with globular body curving in to narrow flat rim, large fill hole. Relatively short, wide nozzle with wick hole touching on rim. Next to nozzle, vertical lug, spool-shaped, and pierced vertically; ... 6th c. BCE |
| Lamp with low convex body, narrow flat rim, sloping down to large fill hole; nozzle cylindrical spout projecting horizontally from body. For similar spout but less long, see KL-192. Dull black glaze over ... 1928;1931 |
| Lamp with disk foot, concave, string-cut undersurface, squat globular body tapering to vertical tapered lip. Nozzle projecting from max. diam. of body; on opposite side, horizontal handle in same place ... 1930;1931 |
Lamp with low torus ring foot, broad flat resting surface, flat undersurface; vertical body with slight convex profile, broad horizontal rim, overhanging inside and out, with two grooves on top. Large ... 5th c. B.C. |
| Lamp of Broneer Type IV with low false disc foot with slightly concave underside, channel cut around base, vertical convex walls, wide incurving rim with rounded lip. Nozzle is fairly square. Traces of ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) |
| Lamp of Broneer Type IV with low false disc foot with slightly concave underside, channel cut around base, vertical convex walls, wide inward horizontal rim with rounded lip. Nozzle is fairly square. Similar ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) |
| Lamp of Broneer Type IV with vertical convex walls, wide incurving rim with rounded lip. Nozzle is fairly square and very thin vertically. Similar to KL 23 from Stelai Shrine A and KL 99 and KL 100, also ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) |
| Lamp with flat bottom curving into low body with vertical profile, broad flat rim, projecting well beyond body and sloping down slightly to moderate fill hole; base of nozzle with large wick hole that ... 2nd half 6th c. B.C. |
| Lamp with concave bottom curving into body that tapers slightly to base of broad overhanging rim that slants down to small fill hole. Broneer Type II, Howland 16B. Thin brown (or self-slip) wash on exterior, ... 525-480 B.C. |
Lamp with flat bottom, hemispherical plan, with short sides closing in to nozzle, vertical body, judging from profile against nozzle, flat lip no thicker than body. Body twice as thick on sides as against ... late 7th-early 6th c. BCE |
| Lamp with rounded bottom, body angles sharply inward with straight profile, sharply angled out to broad flat rim, overhanging exterior as far as body, and interior. Horizontal lug handle, squared, with ... 1st half 6th c. B.C. |
| Lamp with flat base, echinoid body curving in to broad horizontal rim with flat raised lip surrounding moderate fill hole. Large nozzle, round-tipped with large wick hole just touching rim. Horizontal ... 1st half 5th c. BCE |
Potters' Quarter. Terracotta Factory. Altar Room ... 1930/06/13 |
| Miniature lamp with flat base and convex walls, incurving rim with tapered lip. Wide, rounded nozzle. Attachments for horizontal strap handle. String marks on base. Black slip over all. Fine pale brown ... Deposit is likely 2nd half of the 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
Lamp with rounded shoulder broad flat rim, broad shallow disk with very small fill hole. Relief decoration: sunken panel on rim with relief dotted circles alternating with triangles; disk: cross with dotted ... 6th c. A.C. or later |
| Potters' Quarter. Terracotta Factory. Court ... 1930/06/07 |
| Lamp with flat base, squat globular body curving in to horizontal rim with slight raised flat lip surrounding large fill hole. Large round-tipped nozzle with large wick hole impinging on rim. Horizontal ... 1st quarter 5th c. B.C. |
Broneer type II lamp with flat bottom, squat globular body, broad flat rim, overhanging inside and out. Large fill hole; base of large nozzle with wick hole just touching on rim. Nozzle dipped in black ... 2nd half 6th c. B.C. |
| Potters' Quarter. Stelai Shrine A. Found on bottom, east of stelai ... 1928/04/11 |
| Lamp with flat bottom, cylindrical body, narrow projecting band at top, broad flat rim, overhanging interior only and slanting down to large fill hole. Pierced vertical lug attached to body, semi-circular ... late 7th-6th c. BCE |
| Lamp with verticall ring foot, flat resting surface, rounded undersurface; squat globular body, rim, set well in from max. diam., with flat surface slanting slightly to large fill hole, flat floor. Large ... late 7th or early 6th c. BCE |
| Lamp with concave bottom, squat globular body curving in to broad collar rim (W. 0.01), raised above shoulder, flat and slanting down toward large fill hole; floor humped. Large nozzle with pointed tip, ... 1st half 5th c. BCE |
| Lamp with flat, string-cut base, squat globular body curving in to flat rim with pronounced plastic ring surrounding large fill hole. Floor convex. Large nozzle with large wick hole impinging on rim. Dull ... 1st half 5th c. B.C. |
| Small saucer with flat, string-cut bottom, shallow straight flaring body, beveled inturned rim; large unbridged spout on one side. Published by Stillwell as lamp but probably saucer. Cf. KV-1157, KV-493 ... Probably 5th c. (Stillwell 1952, Corinth 15.2, cat. 35, p. 258) |
| Miniature lamp with flat base and convex walls. Inturned rim with tapered lip. Interior floor slightly convex. Horizontal strap handle attached at shoulder and rising slightly above the plane of the rim ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
| Lamp with flat bottom, small conical depression in center, very shallow wide flaring body, broad horizontal rim overhanging interior and curving slightly downward, giving nearly biconical profile to lamp ... Early 5th c. BCE? |
| Five miniature lamps on a long, thin, flat base, rounded at ends; roughly cut with some adhering bits of clay and concave resting surface; lamps set close together in diagonal position. Individual lamps ... 350-325 B.C. (Stillwell 1952, Corinth 15.2, p. 267) |
| Lamp with flat bottom, conical depression in center; squat globular body, narrow flat rim, slanting sharply in to large fill hole; central cone projecting from floor to well above rim. Large rounded nozzle ... 1st half 6th c. BCE or earlier |
| Lamp, on exterior: tall cylindrical body with projecting fascia at bottom and top, undersurface of lamp bowl set 0.024 from bottom; broad flat rim, projecting on exterior as second fascia; on interior: ... late 7th-early 6th c. BC ? |
| Potters' Quarter. Stelai Shrine A ... 1928/04/12 |
| Lamp with concave bottom curving into flaring body with slight convex profile, max. diam. at top, very broad rim horizontal rim, overhanging inside and out, with convex profile; central hump on floor ... second half 6th c. to start of 5th c. BCE |
| Probably lamp with cylindrical body, outward thickened, broad squared rim, not overhanging on interior, concave floor. At least one projecting lug applied to body and rim, in form of triglyph with rounded ... 7th or early 6th c. B.C. |
| Lamp with probably ovoid body, broad horizontal rim. Three closely set large nozzles with blunt round tips, and large wick holes set well out from rim. Stillwell: Broneer IV. Estimated originally 12 nozzles ... 1931/06/12 |
| Lamp with disk foot with concave undersurface, deep globular body, downturned rim, with deep groove and broad concave channel with fine lip surrounding moderate fill hole. Horizontal loop handle attached ... 2nd half 5th c. B.C. |
Miniature lamp with low false ring foot, convex walls, inturned rim with rounded lip. Long, rounded nozzle with large wick hole. Wheel marks on interior. Black glaze over all. Fine, very pale brown clay ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
| Miniature lamp with flat base only barely distinguished from walls, convex walls, and tapered lip with wide opening. Nipple on interior. Rounded nozzle slighty mishapen underneath. Loop handle projects ... 3rd quarter of the 4th century B.C. (Stillwell 1952, Corinth 15.2, p. 267) |
| Miniature lamp with flat bottom, deep, convex walls, and incurved rim with rounded lip. Small filling hole. Wick hole slightly removed from rim. Nozzle roughly trapezoidal from above. According to Stillwell ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
Lamp, more rounded than 6th c. type. Fragment. Preserving sides and top; missing handle. Potters' Quarter. Trench F ... 1929/05/18 |
Miniature lamp with very low disc base with flat underside (lump of clay attached accidentally). Convex walls, inturned rim with rounded lip. Filling hole slightly misshapen. Wick hole slightly removed ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
Miniature lamp with flat bottom, convex walls, inturned rim with tapered lip. Filling hole is slightly misshapen. Blunt rounded nozzle with wick hole slightly removed from rim. Attachments for horizontal ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
| Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
Potters' Quarter. Terracotta Factory. Altar Room ... 1930/06/12 |
| Miniature lamp with disc foot, echinoid body, and inturned rim with rounded lip. Long nozzel with squared end, hole sightly off center. Horizontal strap handle originally attached at widest part of body, ... 1930/06/16 |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with tapered lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above ... Middle to 3rd Quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp flat base, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Similar to other lamps from the same deposit, KL 167-176. String marks on base. Black glaze over all, mostly ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Long, slightly irregular nozzle. Round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Rounded nozzle with hole slightly off center. Round, horizontal handle attached opposite. Similar to other lamps from the ... Middle to the 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p.43) |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Rounded nozzle. Large, round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Nozzel squared off on tip. Handle attachments opposite nozzle rising slightly above rim. Similar to other lamps from the ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) |
| Miniature lamp with very low disc foot with flat underside, convex body, inturned rim with round lip. Single horizontal strap handle rises slightly above body. Filling hole slightly irrectular. Wick hole ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
| Lamp with flat bottom, flaring body with max. diam. at 0.014, from which contracts with straight profile to base of narrow flat rim, projecting slightly on exterior and interior. Horizontal double loop ... late 7th-early 6th c. B.C. |
Potters' Quarter. Circular Stele Shrine ... 1931/05/19 |
| Potters' Quarter. Circular Stele Shrine ... 1931/05/19 |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 |
| Potters' Quarter. Double Stele Shrine ... 1931/05/05 |
| Attic lamp, Type III. High projection in center, open at top. Polished surface. Lustrous metallic black glaze, brown when dilute. Nozzle and bottom of interior black; three dilute bands on rim; accidental ... 1931/04/20 |
| Lamp with rounded lower body, tapering to narrow flat rim, slightly articulated on exterior and slightly thicker than body wall on interior. Horizontal handle, rectangular in plan and thin strap in section, ... 6th c. |
| Miniature lamp with flat base, convex walls, inturned rim and tapered lip. Large, rounded nozzle. Attachments for horizontal strap handle. String marks on base. Black glaze over all. Fine pale brown clay ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
| Miniature lamp with low disc foot with flat underside, convex walls, and inturned rim with tapered lip. Wide, rounded nozzle. Attachments for horizontal strap handle. Black over all. Fie whitish gray clay ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) |
Lamp with disk foot, straight flaring body to max. diam. at 0.017, from which contracts with straight profile to narrow flat rim that overhangs slightly on interior only, slanting down to large fill hole ... late 7th-early 6th c. |
| Lamp with flat base, body flares out to H. 0.006, then rises vertically to narrow inward thickened rim, surface of which flat but rises toward large fill hole. Stumps of horizontal loop handle attached ... late 7th-early 6th c., deposit c. mid 5th c. B.C. |
Lamp with flaring ring foot, flat resting and undersurface; shallow straight flaring body to max. diam. (H. 0.012) then contracting to base of broad flat rim, overhanging on exterior no further than body ... 6th c. B.C. |
| Lamp with rounded bottom, curves up to sharply articulated vertical body, sharply articulated broad flat rim that overhangs interior only with raised lip surrounding moderate fill hole. Horizontal lug ... early 5th c. B.C. |
| Wheelmade lamp with flat bottom, biconical body, narrow flat rim, large fill hole, edge of nozzle. For type, see Stillwell 1952, Corinth 15.2, p. 255, cat. 9 (KL-179), from Well I. Moderately well-compacted, ... late 7th-beginning 6th c. B.C. |
| Very thin inscribed bronze bowl, flat underneath. Shape similar to Cypriote bowl (Richter, Metrop. Mus. Bronze, cat. 613). Similar inscription under rim in Archaic Boeotion phiale (Eph. Arx. 1896, p. 243, ... inscription dated by Jeffery between 500-475 BCE; majority of context 2nd half 6th c. to early 5th c. BCE |
| Bronze. Potters' Quarter ... 1930/06/19 |
| Bronze. Potters' Quarter ... 1930/04/07 |
| Bronze. Potters' Quarter. Area of circular stele shrine ... 1931/05/23 |
| Bronze. Potters' Quarter ... 1931/05/18 |
| Iron. Potters' Quarter ... 1930/05/22 |
| Bronze. Potters' Quarter ... 1929/05/17 |
| Bronze. Potters' Quarter. Terracotta Factory north room ... 1930/06/17 |
| Bronze. Potters' Quarter ... 1930/06/09
1930/06/09 |
|
|
