[Corinth Object] KL 64: LAMP OF RED CLAY

Potters' Quarter. Terracotta Factory. Court ... 1930/06/13

icon

[Corinth Object] KL 65: LAMP BRONEER TYPE IB4

Lamp with convex body curving in to oblique rim surrounding large fill hole; circular nozzle tilted upward like scoop and rising above rim with large wick hole set obliquely. Dull black glaze on nozzle ... 1930/04/12

icon

[Corinth Object] KL 66: LAMP BRONEER TYPE I

Lamp with squat convex body, curving in very slightly to flat narrow rim that slants slightly down and overhangs interior; large fill hole. Horizontal lug handle, rectangular in plan, thin strap in section ... 1930/04/12

icon

[Corinth Object] KL 67: LAMP BRONEER TYPE I

Lamp with shallow convex body, offset flat rim that projects slightly on exterior and overhangs interior. Horizontal lug handle with horizontal strap handle, set vertically, at base of lug. Black glaze ... 1st quarter 6th c. B.C.

[Corinth Object] KL 68: HELLENISTIC LAMP NOZZLE

Lamp with squat convex body, curving in horizontally to rim; long nozzle, flat on top with rounded tip and slight flukes; large wick hole at tip. Generally as Broneer IX-XI. Black glaze over all, inside ... 1929;1931

icon

[Corinth Object] KL 69: LAMP BRONEER TYPE I

Lamp with flat base, ovoid body, curving in to outward thickened flat narrow rim. Base of nozzle and wick hole. Scar of probable horizontal lug handle opposite nozzle. Carelessly finished, adhering pellets ... 1st half 6th c. B.C.

[Corinth Object] KL 70: ARCHAIC 'COCKED HAT' LAMP

Lamp with slightly concave bottom, articulated by groove, wide flaring body with slight convex profile, flaring rim with flat thick lip, pulled out on side of lamp, pulled up vertically and pinched to ... late 7th-early 6th c. BCE

icon

[Corinth Object] KL 73: LAMP BRONEER TYPE I

Lamp with flat bottom, ovoid body, curving in to articulated broad flat rim that only slightly overhangs exterior, overhangs interior. Horizontal lug handle attached to body and rim. P.Q. type IA4. Black ... 1st half 6th c. B.C.

icon

[Corinth Object] KL 74: ARCHAIC 'COCKED HAT' LAMP

Lamp with flat, string-cut base, wide flaring body, continuing into flaring rim turned out on side and back, and pulled up vertically to right of nozzle; rim sharply articulated from body on interior ... late 7th-early 6th c.

icon

[Corinth Object] KL 75: LAMP BRONEER TYPE I

Lamp with squat globular body, flat rim set well in from max. projection of body. Rim narrow, projecting slightly from body and overhanging interior. Large fill hole. Long, solid horizontal handle, roughly ... 1931/05;1933/11

icon

[Corinth Object] KL 76: ATTIC LAMP HOWLAND 16B

Lamp with bottom curving up into vertical body, broad flat rim, projecting slightly beyond body and slanting down to moderate fill hole; large nozzle with large wick hole that impinges slightly on rim ... 2nd half 6th c. to 480 BCE

icon

[Corinth Object] KL 78: ATTIC LAMP HOWLAND TYPE 24A

Lamp with vertical ring foot, convex undersurface, globular body curving in to narrow rim with plastic ring and thin flat lip surrounding large fill hole. Stump of nozzle. Horizontal loop handle set on ... late 3rd to 4th quarter 5th c. BCE

[Corinth Object] KL 79: WHEELMADE LAMP

Lamp (?) with deep vertical body curving without break into very broad overhanging rim, curves down slightly to very small fill hole; vertical stap handle attached to upper body; rough clay surrounding ... 1929;1931

[Corinth Object] KL 80: LAMP ON STAND

Standed lamp with cylindrical, hollow stand, flaring body with echinoid profile, flat floor; start of flare for nozzle at one end, thickening for probable vertical handle at opposite end. Exact type of ... 1931

icon

[Corinth Object] KL 81: LAMP BRONEER TYPE IV OR TYPE I

Lamp with flat base, globular body continuing into incurving rim with horizontal lip; large fill hole. Large nozzle, tilted up above level of rim, with large wick hole that impinges on rim. Paring marks ... 6th or 5th c. B.C.

icon

[Corinth Object] KL 83: ATTIC LAMP HOWLAND TYPE 24A

Lamp with low disk foot with concave undersurface, shallow convex body, broad horizontal rim, overhanging interior and tapering to lip of large fill hole. Horizontal loop handle set on upper body. Single ... late 3rd to 4th quarter 5th c. B.C.

icon

[Corinth Object] KL 86: LAMP BRONEER TYPE I

Lamp with flaring ring foot, globular body, projection of which equals that of foot, inset and articulated broad flat rim, slopes down to moderate fill hole; base of large nozzle and wick hole that touches ... late 7th-1st half 6th BC

icon

[Corinth Object] KL 87: LAMP BRONEER TYPE I

Lamp with concave bottom, squat globular body, curving in to narrow flat rim, slanting down to large fill hole. Horizontal lug handle, sqare in plan, from which rises second strap handle set vertically ... 6th c. BCE

icon

[Corinth Object] KL 91: LAMP BRONEER TYPE V

Lamp with slightly concave bottom, echinoid body curving in to broad horizontal rim with raised lip around large fill hole. Vertical strap (?) handle attached to top and bottom of body opposite nozzle ... 1931

icon

[Corinth Object] KL 92: LAMP BRONEER TYPE I

Lamp with globular body curving in to narrow flat rim, large fill hole. Relatively short, wide nozzle with wick hole touching on rim. Next to nozzle, vertical lug, spool-shaped, and pierced vertically; ... 6th c. BCE