|
| Lamp with low vertical ring foot, broad resting surface, slanting slightly to flat undersurface. Globular body, offset broad flat rim sloping slightly to large fill hole; base of large nozzle that slants ... 1st half 6th c. B.C. |
| Lamp with broad flaring ring foot, broad flat resting surface, flat undersurface; sharp biconical body, set in from projecting of foot, flaring at top to broad flat rim that projects slightly on exterior ... late 7th-1st half 6th BC |
| Lamp with false ring foot, squat, globular body, small lug with vertical hole on one side; sharply inturned rim with two grooves and tapered lip, broad nozzle. Shape similar to Broneer 1930, Corinth 4.2, ... 3rd quarter of the 4th c. (Stillwell 1952, Corinth 15.2, inv. 81) |
Lamp with low disk foot, deep globular body, flat down-sloping rim with broad shallow, scraped groove at edge. Small fill hole, hump on floor. Long nozzle, flat on top with small wick hole at tip. No handle ... 2nd half 4th c. BCE |
| Lamp with slightly concave base, echinoid body curving in to broad, nearly horizontal rim with raised flat lip surrounding large fill hole. Start of nozzle, edge of wick hole that just touches on rim ... 1st half 5th c. BCE |
| Rectangular lamp with flat bottom, vertical body with flat rim no thicker than body, long, bridged nozzle, as deep as body is high, with large wick hole set well away from rim. Very fine, well-compacted ... late 7th or early 6th c. B.C. |
| Lamp with flat bottom, squat globular body curving in horizontally to thickened rim (W. 0.077) surrounding large fill, and slanting down slightly toward it. Flat floor. Start of nozzle, wick hole impinging ... 1st half 5th c. BCE? |
| Lamp with concave base, globular body curving up to rim with raised collar (W. 0.008), flat, surrounding large fill hole. Large nozzle tilted upward so that tip above rim, large wick hole. Horizontal strap ... 1st half 5th c. B.C. |
| Lamp with flattened bottom, globular body curving into oblique lip. Large fill hole. Bridge composed of arching strap of clay, large nozzle, as deep as body, slightly pinched to form large wick hole. Coarse ... 1930/05/22
1930/05/24 |
| Potters' Quarter. Trench N2 ... 1931/04/22 |
| Lamp with flaring ring foot, narrow resting surface, interior of foot slanting to flat undersurface, ovoid body, tapering to flat rim, slanting sharply down to moderate fill hole. Horizontal lug handle ... late 7th-early 6th c. B.C. |
| Lamp with flat bottom, ovoid body with max. diam. below median, contracting to broad overhanging rim that projects on exterior and forms raised lip, and slants down toward fill hole. Large nozzle, top ... 2nd-3rd quarter 6th c. BC, according to Howland |
| Lamp with flattened or rounded bottom, curving up to vertical body with convex profile, broad horizontal rim, projecting beyond body, and overhanging interior, with slight ridge around moderate fill hole ... 2nd half 6th c. to 480 BC |
| Lamp with flaring ring foot, narrow resting surface, slanting inner surface to flat undersurface; globular body, offset broad, slightly convex rim, outer edge of which projects beyond line of foot but ... 1st half 6th c. B.C. |
Potters' Quarter. Road Deposit ... 1931/04/20 |
| Lamp with flat bottom, slight thickening of floor may suggest central cone or socket, bottom curving up into vertical body with convex profile, broad horizontal rim, slightly concave with ridge surrounding ... ca. 525-480 B.C. |
| Lamp with vertical sides, broad flat rim, sloping down to moderate fill hole. Black glaze over all. Fine gray-buff clay, fired to pale gray-pink at core, with rare fine voids. Fragment. Single frgt., preserving ... late 5th to 4th c. B.C. |
Potters' Quarter. Trench N1 (Not Road Deposit as published) ... 1931/04/20 |
| Lamp with flat bottom with slight central depression, squat globular body curving in horizontally to broad rim with thickened collar surrounding large fill hole; floor with low hump. Bottom, lower half ... 1st half 5th c. B.C. |
| Lamp with slightly concave bottom (no base), convex body, nearly flat inturned rim with tapered lip, comparatively long rounded nozzle with wick hole removed from rim. Attachments for horizontal strap ... Late 5th c. B.C. (Stillwell 1954, Corinth 15.2, cat. 61, p. 262) |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 |
| Lamp with convex body curving in to oblique rim surrounding large fill hole; circular nozzle tilted upward like scoop and rising above rim with large wick hole set obliquely. Dull black glaze on nozzle ... 1930/04/12 |
| Lamp with squat convex body, curving in very slightly to flat narrow rim that slants slightly down and overhangs interior; large fill hole. Horizontal lug handle, rectangular in plan, thin strap in section ... 1930/04/12 |
| Lamp with shallow convex body, offset flat rim that projects slightly on exterior and overhangs interior. Horizontal lug handle with horizontal strap handle, set vertically, at base of lug. Black glaze ... 1st quarter 6th c. B.C. |
Lamp with squat convex body, curving in horizontally to rim; long nozzle, flat on top with rounded tip and slight flukes; large wick hole at tip. Generally as Broneer IX-XI. Black glaze over all, inside ... 1929;1931 |
| Lamp with flat base, ovoid body, curving in to outward thickened flat narrow rim. Base of nozzle and wick hole. Scar of probable horizontal lug handle opposite nozzle. Carelessly finished, adhering pellets ... 1st half 6th c. B.C. |
Lamp with slightly concave bottom, articulated by groove, wide flaring body with slight convex profile, flaring rim with flat thick lip, pulled out on side of lamp, pulled up vertically and pinched to ... late 7th-early 6th c. BCE |
| Lamp with flat bottom, ovoid body, curving in to articulated broad flat rim that only slightly overhangs exterior, overhangs interior. Horizontal lug handle attached to body and rim. P.Q. type IA4. Black ... 1st half 6th c. B.C. |
| Lamp with flat, string-cut base, wide flaring body, continuing into flaring rim turned out on side and back, and pulled up vertically to right of nozzle; rim sharply articulated from body on interior ... late 7th-early 6th c. |
| Lamp with squat globular body, flat rim set well in from max. projection of body. Rim narrow, projecting slightly from body and overhanging interior. Large fill hole. Long, solid horizontal handle, roughly ... 1931/05;1933/11 |
| Lamp with bottom curving up into vertical body, broad flat rim, projecting slightly beyond body and slanting down to moderate fill hole; large nozzle with large wick hole that impinges slightly on rim ... 2nd half 6th c. to 480 BCE |
| Lamp with vertical ring foot, convex undersurface, globular body curving in to narrow rim with plastic ring and thin flat lip surrounding large fill hole. Stump of nozzle. Horizontal loop handle set on ... late 3rd to 4th quarter 5th c. BCE |
Lamp (?) with deep vertical body curving without break into very broad overhanging rim, curves down slightly to very small fill hole; vertical stap handle attached to upper body; rough clay surrounding ... 1929;1931 |
Standed lamp with cylindrical, hollow stand, flaring body with echinoid profile, flat floor; start of flare for nozzle at one end, thickening for probable vertical handle at opposite end. Exact type of ... 1931 |
| Lamp with flat base, globular body continuing into incurving rim with horizontal lip; large fill hole. Large nozzle, tilted up above level of rim, with large wick hole that impinges on rim. Paring marks ... 6th or 5th c. B.C. |
| Lamp with low disk foot with concave undersurface, shallow convex body, broad horizontal rim, overhanging interior and tapering to lip of large fill hole. Horizontal loop handle set on upper body. Single ... late 3rd to 4th quarter 5th c. B.C. |
| Lamp with flaring ring foot, globular body, projection of which equals that of foot, inset and articulated broad flat rim, slopes down to moderate fill hole; base of large nozzle and wick hole that touches ... late 7th-1st half 6th BC |
| Lamp with concave bottom, squat globular body, curving in to narrow flat rim, slanting down to large fill hole. Horizontal lug handle, sqare in plan, from which rises second strap handle set vertically ... 6th c. BCE |
| Lamp with slightly concave bottom, echinoid body curving in to broad horizontal rim with raised lip around large fill hole. Vertical strap (?) handle attached to top and bottom of body opposite nozzle ... 1931 |
| Lamp with globular body curving in to narrow flat rim, large fill hole. Relatively short, wide nozzle with wick hole touching on rim. Next to nozzle, vertical lug, spool-shaped, and pierced vertically; ... 6th c. BCE |
|
|