|
|
Bronze pin with long, thin shaft, circular in section, tapering to a sharp point. Separately made head small and in the form of a slightly flattened sphere. Incised groove around center of head. Bronze ... Late Roman or Byzantine |
Bronze ear spoon with straight shaft, circular in section, flattened near the small, concave bowl that projects straight out from the shaft. At other end, shaft flattened again and pierced with circular ... Roman |
| Thimble with very slightly convex sides, tapering from bottom to top. Narrow reserved band at top and bottom; rest covered with fine pin pricks. Bronze. Complete or intact. Intact ... 7? Middle Byzantine? Coin to Leo VI (10th c.) |
Bronze implement with thin shaft, oval in section, tapering to a fine point at one end. Other end flattened and wider than shaft. May be a needle, stylus, or other similar pointed implement. Bronze Missing ... 1937/11/19 |
Convex bronze door boss. Bronze. Complete or intact ... 1937/11/13 |
Bronze lamphanger consisting of a long, thin wire flattened at both ends. Both ends bent into a small loop, and one end bent again into another, larger loop or hook. Corresponds with Gill's Type B or C ... Byzantine |
Bronze implement consisting of a thin shaft, oval in section, tapering to a sharp point at one end, flattened and bent into a small loop at the other end. May be a pin or lamp cleaner. Bronze Complete ... 1938/05/18 |
Cups and/or bowls with straight or everted rolled rims. Pale yellow and pale green glass. Some very clear, some with common tiny bubbles Fragment. 8 fragments. Non-joining. Iridescent coating and some ... 1938/05/30 |
Archaic bronze pin with thick shaft, circular in section. Head composed of five disks of various sizes: from bottom to top: thin disk D. 0.008, wider rounded disk D. 0.010, thin disk D. 0.011, wider rounded ... 7th century BCE |
| Gray clay. Complete or intact. |
| Lead clamp for mending pithos, composed of a large triangle, each side of which is convex on upper face, with flat undersurface, and untrimmed flanges along both edges. Beneath each point is a cylindrical ... Unknown. |
| Loomweight with flat bottom, flaring to high bevel, tapering to blunt tip. Pierced for suspension 0.023 m. below tip. Surface carefully smoothed. inscribed. Incised on side just above bevel, with blunt-tipped ... 1936/11/13 |
| Loomweight with flat bottom, edges of which worn, wide flaring body to bevel, contracting toward tip. Pierced horizontally for suspension. Bevel worn or slightly flattened on either side. Corinth XII Profile ... 1938/05/04 |
|
|
