icon

[Corinth Object] L 95: LAMP BRONEER TYPE XIX

Lamp with flat base, biconical body; no collar but 2 low plastic rings surrounding broad disk with slightly raised lip around moderate fill hole. Start of nozzle, round in section. Vertical ridged strap ... 1st

icon

[Corinth Object] L 96: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, no collar rim but low plastic ring surounding concave disk with small fill hole; nozzle, round in section; vertical strap handle attached to upper body. In relief ... 1st AC

icon

[Corinth Object] L 98: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, flaring collar rim, horizontal disk with 3 small holes, small fill hole. Long nozzle, round in section, with edge of wick hole near tip. Vertical strap handle attached ... 1st AC

icon

[Corinth Object] L 101: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, vertical collar rim surrounding flat disk pierced by 2 small holes, small fill hole. Vertical strap handle attached to upper body. In relief on upper body: intermittent ... 1st AC

icon

[Corinth Object] L 103: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, flaring collar rim, flat disk with 3 small holes, small fill hole; start of nozzle, round in section; vertical strap handle attached to upper body. Relief decoration ... 1st AC

icon

[Corinth Object] L 105: LAMP BRONEER TYPE XIX

Lamp with slightly concave bottom, biconical body, flaring collar rim, narrow disk with 3 small holes, moderate fill hole. Long nozzle, round in section, vertical strap handle attached to upper body. In ... 1st AC

icon

[Corinth Object] L 108: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body with sharp carination, low flaring collar rim, broad flat disk with moderate fill hole. Long nozzle round in section with pronounced flanges from mould, broad groove ... 1st AC

icon

[Corinth Object] L 110: LAMP BRONEER TYPE XIX

Lamp with flat bottom, biconical body, vertical collar surrounding horizontal disk with small fill hole; long nozzle, round in section with edge of wick hole near tip. Vertical strap handle attached to ... 1st AC

icon

[Corinth Object] L 124: LAMP BRONEER TYPE XVII

Clay with string-cut flat base, flaring lower body with concave profile, sharply articulated upper body, deep with convex profile curving in with incurved narrow rim with moderate fill hole; short nozzle, ... Hellenistic

icon

[Corinth Object] L 127: LAMP BRONEER TYPE XVII

Lamp with irregularly trimmed, string-cut disk foot, ovoid body with max. diam. just above foot, tapering with convex profile to narrow incurving rim, large fill hole. Short nozzle with fluked tip, large ... Hellenistic

icon

[Corinth Object] L 129: LAMP BRONEER TYPE XVI

Lamp with flat base, nearly globular body with max. diam. somewhat below median, curving in to narrow rim, slightly concave in section, moderate fill hole; start of nozzle, round in section and tilted ... Early Roman ?

icon

[Corinth Object] L 130: LAMP BRONEER TYPE XVI

Lamp with flat base, straight flaring lower body rising to H00.013, then turning sharply to vertical; rim not articulated on exterior, on interior, sloping down to depressed disk with slight concaveprofile, ... Early Roman

icon

[Corinth Object] L 156: LAMP BRONEER TYPE XVI

Stand consisting of a hollow cylinder, closed at top and flaring at top into a broad horizontal rim; rising from this element is a second hollow cylinder. Attached to either side of upper cylinder are ... late 1st or early 2nd c. ?

icon

[Corinth Object] L 157: LAMP BRONEER TYPE XVI

Type XVI lamp, originally part of stand with several lamps: on underside, top of solid stand/attachment with egg-shaped horizontal section, trace of another element (lamp?) adhering to rt. side of body ... Early Roman

icon

[Corinth Object] L 179: LAMP BRONEER TYPE XXVII

Lamp with flat bottom framed by groove, echinoid body, flat rim with 2 raised panels, plastic ring around deep concave disk with fill hole off-center at 9:00. Small airhole at base of nozzle. Nozzle U-shaped ... 2nd-3rd c. A.C.

icon

[Corinth Object] L 181: LAMP BRONEER TYPE XXVII

Lamp with flat bottom framed by groove, echinoid body, broad nearly flat rim with 2 panels; plastic ring framing deep concave disk; off-center fill hole at ca. 9:00; tiny airhole in edge of disk; U-shaped ... 2nd-3rd c. A.C.

icon

[Corinth Object] L 182: LAMP BRONEER TYPE XXVII

Lamp with flat bottom framed by groove, deep flaring and rounded body, broad nearly flat rim with 2 raised panels; plastic ring around shallow concave disk with off-center fill hole at 2:00; slit airhole ... 2nd-3rd c. A.C.

icon

[Corinth Object] L 191: LAMP BRONEER TYPE XXVII

Type XXVII lamp with flat bottom offset by incised circle, deep flaring convex body, broad flat rim with raised panels, shallow concave disk with fill hole to rt. of center, nozzle with flat panel enclosing ...