|
|
| Potters' Quarter. Stelai Shrine A. Found on bottom, east of stelai ... 1928/04/11 ... KL |
| Potters' Quarter. Stelai Shrine A ... 1928/04/12 ... KL |
| Potters' Quarter. Stelai Shrine A. 30 cm below level of east wall ... 1928/04/13 ... KL 21 |
| Lamp with flat base, squat globular body curving in to horizontal rim with slight raised flat lip surrounding large fill hole. Large round-tipped nozzle with large wick hole impinging on rim. Horizontal ... 1st quarter 5th c. B.C ... KL 124 |
Lamp with slightly concave base, very deep body with flaring convex profile, thick seam at juncture to rim, broad rim, concave disk with small fill hole; air hole at edge of rim, part of wick hole cutting ... 5-6th c ... KL 19 |
Lamp with low disk foot, deep vertical body curving without break into slightly flaring rim; sunken disk with compound profile: deep channel surrounding convex band, in turn surrounding recessed lip, small ... 1st BC-1st AC ... KL |
Lamp, more rounded than 6th c. type. Fragment. Preserving sides and top; missing handle. Potters' Quarter. Trench F ... 1929/05/18 ... KL |
| Lamp with flat base, body flares out to H. 0.006, then rises vertically to narrow inward thickened rim, surface of which flat but rises toward large fill hole. Stumps of horizontal loop handle attached ... late 7th-early 6th c., deposit c. mid 5th c. B.C ... KL 197 |
| Lamp with concave bottom, squat globular body curving in to broad collar rim (W. 0.01), raised above shoulder, flat and slanting down toward large fill hole; floor humped. Large nozzle with pointed tip, ... 1st half 5th c. BCE ... KL 131 |
Lamp with low disk foot, concave undersurface; body flares out nearly horizontally with straight profile, then turns sharply up, convex upper body, tapering slightly to narrow flat shoulder, broad down-curving ... Late 5th to early 4th c. B.C ... KL |
| Lamp with flat bottom, small conical depression in center, very shallow wide flaring body, broad horizontal rim overhanging interior and curving slightly downward, giving nearly biconical profile to lamp ... Early 5th c. BCE? ... KL 136 |
| Lamp with flat bottom, body with max. diam. just above bottom, tapering slightly to narrow flat rim, projecting slightly on exterior. Large fill hole. Flat floor. Large rounded nozzle, not rising to height ... 1st half 6th c. B.C ... KL 1 |
| Lamp with echinoid body, contracting to base of offset rim. Horizontal lug handle, rectangular in plan, thin strap in section. Black glaze on rim; on handle 3 black stripes across width, with long stripe ... Late 7th-early 6th c. B.C ... KL |
| Lamp with flat bottom, shallow globular body, narrow flat rim only slightly thicker than thickness of body, very large fill hole; start of nozzle that ends below rim. Similar to KL-192 (Sillwell 1952, ... Late 7th-early 6th c. B.C ... KL 7 |
| Lamp with disk foot or ring foot, body rising steeply with straight profile to H. 0.02, then contracting to narrow rim, articulated on exterior, and slanting sharply down to large fill hole. Horizontal ... late 7th-early 6th c ... KL |
Lamp with possible small foot in center of underside, shallow globular body, concave necking articulating thick flat rim, projecting on exterior no further than body, and slightly overhanging interior ... late 7th-early 6th c ... KL |
Lamp with flat bottom with scar for foot or pedestal, globular body curving in to narrow shoulder with deep V-shaped groove, vertical lip rising above height of shoulder, large fill hole. Black glaze over ... early 6th c ... KL 31 |
Lamp with convex body curving up almost vertically to broad flat rim, overhanging interior; vertical strap handle attached to lower body and rim. Surface finely burnished. Fine pale brown clay with 1% ... late 7th-early 6th c. B.C ... KL |
| Lamp with verticall ring foot, flat resting surface, rounded undersurface; squat globular body, rim, set well in from max. diam., with flat surface slanting slightly to large fill hole, flat floor. Large ... late 7th or early 6th c. BCE ... KL |
| Lamp with flat bottom, conical depression in center; squat globular body, narrow flat rim, slanting sharply in to large fill hole; central cone projecting from floor to well above rim. Large rounded nozzle ... 1st half 6th c. BCE or earlier ... KL 139 |
| Lamp with flat bottom, flaring body with max. diam. at 0.014, from which contracts with straight profile to base of narrow flat rim, projecting slightly on exterior and interior. Horizontal double loop ... late 7th-early 6th c. B.C ... KL 179 |
Lamp with disk foot, straight flaring body to max. diam. at 0.017, from which contracts with straight profile to narrow flat rim that overhangs slightly on interior only, slanting down to large fill hole ... late 7th-early 6th c ... KL 196 |
| Lamp with flat bottom with slight central depression, squat globular body curving in horizontally to broad rim with thickened collar surrounding large fill hole; floor with low hump. Bottom, lower half ... 1st half 5th c. B.C ... KL 62 |
| Lamp with flat bottom, cylindrical body, narrow projecting band at top, broad flat rim, overhanging interior only and slanting down to large fill hole. Pierced vertical lug attached to body, semi-circular ... late 7th-6th c. BCE ... KL |
| Lamp with flaring ring foot, slanting resting surface, flat undersurface, globular body that projects well beyond foot, narrow flat rim, raised above body and set on line of foot, large fill hole; large ... late 7th-early 6th c. B.C ... KL |
| Lamp with convex body, offset broad flat rim that projects as far as body on exterior and overhangs interior. Horizontal lug handle on upper half of body, on which horizontal strap handle set vertically ... late 7th to early 6th c. B.C ... KL 33b |
| Lamp with low vertical ring foot, broad resting surface, slanting slightly to flat undersurface. Globular body, offset broad flat rim sloping slightly to large fill hole; base of large nozzle that slants ... 1st half 6th c. B.C ... KL |
| Lamp with broad flaring ring foot, broad flat resting surface, flat undersurface; sharp biconical body, set in from projecting of foot, flaring at top to broad flat rim that projects slightly on exterior ... late 7th-1st half 6th BC ... KL |
| Lamp with flaring ring foot, narrow resting surface, interior of foot slanting to flat undersurface, ovoid body, tapering to flat rim, slanting sharply down to moderate fill hole. Horizontal lug handle ... late 7th-early 6th c. B.C ... KL 48 |
| Lamp with flat base, ovoid body, curving in to outward thickened flat narrow rim. Base of nozzle and wick hole. Scar of probable horizontal lug handle opposite nozzle. Carelessly finished, adhering pellets ... 1st half 6th c. B.C ... KL 69 |
| Lamp with flat bottom, squat globular body curving in horizontally to thickened rim (W. 0.077) surrounding large fill, and slanting down slightly toward it. Flat floor. Start of nozzle, wick hole impinging ... 1st half 5th c. BCE? ... KL 44 |
| Lamp with convex body curving in to oblique rim surrounding large fill hole; circular nozzle tilted upward like scoop and rising above rim with large wick hole set obliquely. Dull black glaze on nozzle ... 1930/04/12 ... KL 65 |
| Lamp with squat convex body, curving in very slightly to flat narrow rim that slants slightly down and overhangs interior; large fill hole. Horizontal lug handle, rectangular in plan, thin strap in section ... 1930/04/12 ... KL 66 |
| Lamp with flat base, globular body continuing into incurving rim with horizontal lip; large fill hole. Large nozzle, tilted up above level of rim, with large wick hole that impinges on rim. Paring marks ... 6th or 5th c. B.C ... KL 81 |
| Lamp with false ring foot, squat, globular body, small lug with vertical hole on one side; sharply inturned rim with two grooves and tapered lip, broad nozzle. Shape similar to Broneer 1930, Corinth 4.2, ... 3rd quarter of the 4th c. (Stillwell 1952, Corinth 15.2, inv. 81) ... KL |
| Lamp with concave base, globular body curving up to rim with raised collar (W. 0.008), flat, surrounding large fill hole. Large nozzle tilted upward so that tip above rim, large wick hole. Horizontal strap ... 1st half 5th c. B.C ... KL |
| Lamp with flattened bottom, globular body curving into oblique lip. Large fill hole. Bridge composed of arching strap of clay, large nozzle, as deep as body, slightly pinched to form large wick hole. Coarse ... 1930/05/22
1930/05/24 ... KL |
| Potters' Quarter. Terracotta Factory. Court ... 1930/06/07 ... KL |
| Five miniature lamps on a long, thin, flat base, rounded at ends; roughly cut with some adhering bits of clay and concave resting surface; lamps set close together in diagonal position. Individual lamps ... 350-325 B.C. (Stillwell 1952, Corinth 15.2, p. 267) ... shape similar to KL 163 |
Potters' Quarter. Terracotta Factory. Altar Room ... 1930/06/12 ... KL |
Lamp with low disk foot, deep globular body, flat down-sloping rim with broad shallow, scraped groove at edge. Small fill hole, hump on floor. Long nozzle, flat on top with small wick hole at tip. No handle ... 2nd half 4th c. BCE ... KL |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 ... KL |
Potters' Quarter. Terracotta Factory. Altar Room ... 1930/06/13 ... KL 116 |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 ... KL |
| Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 ... KL 163 |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 ... KL |
Potters' Quarter. Terracotta Factory. Court ... 1930/06/13 ... KL 165 |
| Miniature lamp with disc foot, echinoid body, and inturned rim with rounded lip. Long nozzel with squared end, hole sightly off center. Horizontal strap handle originally attached at widest part of body, ... 1930/06/16 ... same deposit, KL 168-176. |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with tapered lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above ... Middle to 3rd Quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL 167-176. |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL |
| Miniature lamp flat base, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Similar to other lamps from the same deposit, KL 167-176. String marks on base. Black glaze over all, mostly ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL 171 |
| Miniature lamp with very low disc foot with flat underside, echinoid body and inturned rim with rounded lip. Long, rounded nozzle. Round, horizontal handle attached opposite nozzle. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Long, slightly irregular nozzle. Round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL 173 |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Rounded nozzle with hole slightly off center. Round, horizontal handle attached opposite. Similar to other lamps from the ... Middle to the 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p.43) ... KL 174 |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Rounded nozzle. Large, round, horizontal handle attached opposite nozzle rises slightly above rim. Similar to other lamps ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... KL 175 |
| Miniature lamp with flat base, echinoid body and inturned rim with rounded lip. Nozzel squared off on tip. Handle attachments opposite nozzle rising slightly above rim. Similar to other lamps from the ... Middle to 3rd quarter of the 4th c. B.C. (Stillwell 1948, Corinth 15.1, p. 43) ... from the same deposit, KL |
| Miniature lamp with flat base only barely distinguished from walls, convex walls, and tapered lip with wide opening. Nipple on interior. Rounded nozzle slighty mishapen underneath. Loop handle projects ... 3rd quarter of the 4th century B.C. (Stillwell 1952, Corinth 15.2, p. 267) ... KL |
| Miniature lamp with flat bottom, deep, convex walls, and incurved rim with rounded lip. Small filling hole. Wick hole slightly removed from rim. Nozzle roughly trapezoidal from above. According to Stillwell ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL 158 |
| Lamp with slightly concave bottom (no base), convex body, nearly flat inturned rim with tapered lip, comparatively long rounded nozzle with wick hole removed from rim. Attachments for horizontal strap ... Late 5th c. B.C. (Stillwell 1954, Corinth 15.2, cat. 61, p. 262) ... KL |
Miniature lamp with low false ring foot, convex walls, inturned rim with rounded lip. Long, rounded nozzle with large wick hole. Wheel marks on interior. Black glaze over all. Fine, very pale brown clay ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
Miniature lamp with very low disc base with flat underside (lump of clay attached accidentally). Convex walls, inturned rim with rounded lip. Filling hole slightly misshapen. Wick hole slightly removed ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
Miniature lamp with flat bottom, convex walls, inturned rim with tapered lip. Filling hole is slightly misshapen. Blunt rounded nozzle with wick hole slightly removed from rim. Attachments for horizontal ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
| Small saucer with flat, string-cut bottom, shallow straight flaring body, beveled inturned rim; large unbridged spout on one side. Published by Stillwell as lamp but probably saucer. Cf. KV-1157, KV-493 ... Probably 5th c. (Stillwell 1952, Corinth 15.2, cat. 35, p. 258) ... KL 133 |
| Lamp of Broneer Type IV with low false disc foot with slightly concave underside, channel cut around base, vertical convex walls, wide incurving rim with rounded lip. Nozzle is fairly square. Traces of ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) ... KL |
| Lamp of Broneer Type IV with low false disc foot with slightly concave underside, channel cut around base, vertical convex walls, wide inward horizontal rim with rounded lip. Nozzle is fairly square. Similar ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) ... KL 100 |
| Lamp of Broneer Type IV with vertical convex walls, wide incurving rim with rounded lip. Nozzle is fairly square and very thin vertically. Similar to KL 23 from Stelai Shrine A and KL 99 and KL 100, also ... Mid 5th c. B.C. (Stillwell 1952, Corinth 15.2, p. 262, cat. 60) ... KL |
| Miniature lamp with flat base and convex walls, incurving rim with tapered lip. Wide, rounded nozzle. Attachments for horizontal strap handle. String marks on base. Black slip over all. Fine pale brown ... Deposit is likely 2nd half of the 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
| Miniature lamp with very low disc foot with flat underside, convex body, inturned rim with round lip. Single horizontal strap handle rises slightly above body. Filling hole slightly irrectular. Wick hole ... Likely late 5th c. B.C. (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
| Miniature lamp with flat base, convex walls, inturned rim and tapered lip. Large, rounded nozzle. Attachments for horizontal strap handle. String marks on base. Black glaze over all. Fine pale brown clay ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL 193 |
| Miniature lamp with low disc foot with flat underside, convex walls, and inturned rim with tapered lip. Wide, rounded nozzle. Attachments for horizontal strap handle. Black over all. Fie whitish gray clay ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL |
| Miniature lamp with flat base and convex walls. Inturned rim with tapered lip. Interior floor slightly convex. Horizontal strap handle attached at shoulder and rising slightly above the plane of the rim ... 2nd half of the 5th c. B.C. or later (Stillwell and Benson 1984, Corinth 15.3, p. 212) ... KL 134 |
| Lamp with shallow convex body, offset flat rim that projects slightly on exterior and overhangs interior. Horizontal lug handle with horizontal strap handle, set vertically, at base of lug. Black glaze ... 1st quarter 6th c. B.C ... KL |
| Lamp with rounded bottom, body angles sharply inward with straight profile, sharply angled out to broad flat rim, overhanging exterior as far as body, and interior. Horizontal lug handle, squared, with ... 1st half 6th c. B.C ... KL 111 |
Potters' Quarter. Road Deposit ... 1931/04/20 ... KL 55 |
| Lamp with vertical sides, broad flat rim, sloping down to moderate fill hole. Black glaze over all. Fine gray-buff clay, fired to pale gray-pink at core, with rare fine voids. Fragment. Single frgt., preserving ... late 5th to 4th c. B.C ... KL |
Potters' Quarter. Trench N1 (Not Road Deposit as published) ... 1931/04/20 ... KL |
| Attic lamp, Type III. High projection in center, open at top. Polished surface. Lustrous metallic black glaze, brown when dilute. Nozzle and bottom of interior black; three dilute bands on rim; accidental ... 1931/04/20 ... KL |
| Potters' Quarter. Trench N2 ... 1931/04/22 ... KL |
Lamp with low torus ring foot, broad flat resting surface, flat undersurface; vertical body with slight convex profile, broad horizontal rim, overhanging inside and out, with two grooves on top. Large ... 5th c. B.C ... KL |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 ... KL 184 |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 ... KL 185 |
Potters' Quarter. Double Stele Shrine ... 1931/05/04 ... KL 186 |
| Potters' Quarter. Double Stele Shrine ... 1931/05/05 ... KL 187 |
| Lamp with concave bottom curving into flaring body with slight convex profile, max. diam. at top, very broad rim horizontal rim, overhanging inside and out, with convex profile; central hump on floor ... second half 6th c. to start of 5th c. BCE ... KL 142 |
Potters' Quarter. Circular Stele Shrine ... 1931/05/19 ... KL 182 |
| Potters' Quarter. Circular Stele Shrine ... 1931/05/19 ... KL |
| Lamp with flat base, echinoid body curving in to broad horizontal rim with flat raised lip surrounding moderate fill hole. Large nozzle, round-tipped with large wick hole just touching rim. Horizontal ... 1st half 5th c. BCE ... KL 115 |
| Lamp with flat, string-cut base, squat globular body curving in to flat rim with pronounced plastic ring surrounding large fill hole. Floor convex. Large nozzle with large wick hole impinging on rim. Dull ... 1st half 5th c. B.C ... KL 132 |
| Lamp, on exterior: tall cylindrical body with projecting fascia at bottom and top, undersurface of lamp bowl set 0.024 from bottom; broad flat rim, projecting on exterior as second fascia; on interior: ... late 7th-early 6th c. BC ? ... KL |
| Lamp with disk foot with concave undersurface, deep globular body, downturned rim, with deep groove and broad concave channel with fine lip surrounding moderate fill hole. Horizontal loop handle attached ... 2nd half 5th c. B.C ... KL 152 |
| Lamp with probably ovoid body, broad horizontal rim. Three closely set large nozzles with blunt round tips, and large wick holes set well out from rim. Stillwell: Broneer IV. Estimated originally 12 nozzles ... 1931/06/12 ... KL |
| Lamp with ring foot from which body extends out and up vertically to outward thickened flat, narrow rim, large fill hole. Short round nozzle with large wick hole that doesn't impinge on rim. Dull black ... 7th-6th c. B.C ... KL |
| Lamp with flaring ring foot, broad flat resting surface, groove articulating flat undersurface. Squat globular body, articulated flat rim, projecting slightly less than body and overhanging interior. Scar ... Late 7th or early 6th C. B.C ... KL |
| Lamp with low ring foot, broad resting surface slanting to flat undersurface, rounded biconical body, narrow offset flat rim, set outside line of foot and only slightly overhanging interior. Shallow nozzle, ... Late 7th-1st half 6th BC ... KL |
| Lamp with concave bottom, biconical body curving up to broad flat rim that slopes sharply downward to large fill hole; floor flat; scar of nozzle, attached to body. For type see Stillwelll 1952, Corinth ... Archaic ... KL |
Broneer type XXVII lamp with flat bottom, surrounded by groove, start of echinoid body. inscribed. Inscribed on bottom in Greek: ]NS (lunate sigma). Deeply impressed holes at apices of letters. Fine buff ... 2nd half 2nd to early 3rd c. A.C ... KL |
Lamp with shallow convex body curving in to oblique rim; bowl of lamp pinched to form one, possibly two, unbridged nozzles; each nozzle short and shallow. Fine buff clay. Fragment. Single frgt., preserving ... 1929;1931 ... KL |
| Lamp with globular body, articulated flat rim that projects less than body, and only slightly overhangs interior, large fill hole; scar on upper half of body, probably for horizontal lug handle. For body-rim ... 7th to early 6th c ... KL |
| Lamp with slightly concave base, echinoid body curving in to broad, nearly horizontal rim with raised flat lip surrounding large fill hole. Start of nozzle, edge of wick hole that just touches on rim ... 1st half 5th c. BCE ... KL |
|
|
