|
|
| Small flase ring foot, flaring sides with slight curve insward at lip. 7 grooves on lower part of side, 2 around center of outside. Zones of design on interior set off by grooves incised through black ... |
| Articulated kantharos. Upper wall only; vertical rim; strap handle with strap thumb rest, from rim to upper body. Fully glazed. Two fine wheel grooves, closely spaced, at handle zone. Fine soft Corinthian ... 275 B.C. or later |
| Kantharos with high ring foot in two degrees, flat resting surface. Short concave stem, body in two degrees offset from stem. Deeper lower section ovoid, upper vertical with concave profile to high ... First half (GRE) |
| Large articulated kantharos with straight tapering body, fine rounded lip. Two thin vertical spurred strap handles on upper body to 00.005 m. below lip. Faint paddling (?) lines on one face in handle zone ... 330-300 B.C. |
| Campanian Fishplate with high, silghtly flaring ring foot, convex resting surface. Deep, straight -flaring body, offset, wide, straight-flaring rim. Oblique, rounded lip. Center of floor depressed ... Hellenistic |
| Chytra with rounded bottom, ovoid body with greatest maximum diameter below median at 0.063. Outward flaring rim joining body with soft articulation. Prominent wheel ridges at articulation. Lip beveled ... 1934/05/22 |
| Kantharos with moulded ring foot: nearly straight flaring with groove near upper edge, nearly flat resting surface, conical under-surface. Narrow stem, globular body outset vertical rim with concave profile, ... |
| Skyphos with narrow torus ring foot, body with compound curve, lower portion contracted with nearly straight profile, curving to convex upper body, flaring lip. Two horizontal loop handles, slightly tilted ... Second quarter 4th c. BC |
| Krater with ring foot in two degrees: lower an inverted echinus, upper a flange. Lip in two degrees: lower is convex, upper is a double fillet. High full body sharply separated from foot, opening into ... |
| Chytra with slightly flattened bottom, ovoid body with max. diam. Below median at 0.045. Wheel groove at rim attachment. Flaring rim with inward beveled lip, conacave inside. Flange as downward sloping ... 1946/11/20 |
| Bottom slightly concave with rosette in relief and surrounded by double base-ring. Tongue pattern radiating from bottom to point on middle of bowl. Horizontal row of dots above tongue pattern, and raised ... |
| Articulated kantharos with flaring ring foot. Flat resting surface. Concave underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with angular carination ... 1947/03/05 |
| Articulated kantharos with flaring ring foot. Flat resting surface. Conical underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with rounded carination ... 1947/03/05 |
| Cyma kantharos with stem foot, flat resting surface and nippled conical undersurface, with moulded exterior in two degrees; wide lower with convex sloping side ending in tapered edge, upper high, narrow ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and concave undersurface, with moulded exterior in two degrees; narrow lower with convex sloping side ending in beveled edge, upper medium-thick beveled ... 1947/03/05;1947/03/06 |
| Cyma kantharos with wide body, lower almost globular and upper straight and almost vertical in profile, narrowing to a small everted tapered lip. Two vertical strap handles with rectangular thumb rest ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and concave undersurface, with moulded exterior in two degrees; wide lower with straight sloping side ending in beveled edge, high upper medium thin ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; narrow lower with convex sloping side ending in beveled edge, upper thin pointed ridge ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; wide and low lower with straight sloping side ending in beveled edge, upper wide, thick ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; wide lower with convex sloping side ending in tapered edge, upper medium-thin ridge with ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; narrow lower with convex sloping side ending in beveled edge, upper high ridge with ... 1947/03/05;1947/03/06 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled. Flat underside. Exterior of foot has profile wheel grooved in two degrees. Biconical nearly globular body with rounded carination ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; wide lower with straight sloping side ending in beveled edge, upper high, narrow step ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and nippled conical undersurface, with moulded exterior in two degrees; narrow lower with convex sloping profile ending in beveled edge, upper very thin ... 1947/03/05;1947/03/06 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled in to flat underside. Exterior of foot has convex profile. Biconical body with angular carintation set at approx. two-thirds the height ... 1947/03/05;1947/03/06 |
| Articulated kantharos with flaring ring foot. Flat resting surface. Concave underside with large nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical nearly globular body ... 1947/03/05;1947/03/06 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; wide lower with convex sloping side ending in beveled edge, upper thick ring with square ... 1947/03/05;1947/03/06 |
| One piece kantharos with flaring ring foot with groove, trimmed along edge, flat resting surface, flat undersurface, body flares widely to median and contracts in a convex curve to the vertical fine ... 300 (GRE) |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; wide lower with convex sloping side ending in tapered edge, upper narrow, high step rising ... 1947/03/05;1947/03/06 |
| Calyx kantharos with stem offset from body by ring. Body with compound profile, bottom flares convex to nearly conical with nearly horizontal shoulder joining to upper part, which is set off by single ... First half of 3rd c. B.C. (Corinth VII.3 p. 74), 275-260 BC (Agora XXIX.1 pp. 250-51) |
| Cyma kantharos with stem foot, flat resting surface and convex undersurface, with moulded exterior in two degrees; high, wide lower with convex side ending in beveled edge, upper high ridge with pointed ... 1947/02/17 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with mouded exterior in two degrees; high, wide lower with straight sloping side and single groove running around its circumference, ... 1947/02/16 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to interior. Underside deeply concave with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical ... 1947/02/14 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; low, wide lower with convex sloping side ending in beveled edge, upper high ridge with ... 1947/02/17 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with moulded exterior in two degrees; high, wide lower with horizontal top and straight sloping profile ending in beveled ... 1947/02/17 |
| Cyma kantharos with stem foot, flat resting surface and convex undersurface, with molded exterior in two degrees; wide lower with convex sloping side ending in beveled edge, upper a thin ridge with square ... 1947/02/17 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to concave interior with nipple in center. Exterior profile of foot is wheel grooved in two degrees. Biconical body with angular carination ... 1947/02/19
1947/02/19;1947/03/12
1947/02/19;1947/03/12 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to concave underside. Biconical body with angular carination set at approx. two-thirds the height of the body. Lower walls convex ... 1947/02/19-20 |
| Articulated kantharos with flaring ring base. Resting surface tapered to convex underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with angular carination ... 1947/02/19-20 |
| Plate with flaring ring foot, flat resting surface, conical undersurface, straight flaring sides to flat rim with rounded lip. Black glaze overall interior and upper part exterior. Groove inside rim ... 1/4 2nd to interim period (Sarah James), 146 BC (GRE) |
| Fish plate with flaring ring foot with flat resting surface and conical undersurface, straight flaring wall with circular depression (Diam. 0.045) in center of interior. Black glaze overall except for ... Late 4th to late 3rd (ca. 225) (Sarah James) |
| Cyma kantharos with a globular body articulated from an everted, tapered lip. A grooved vertical strap handle attaches at lip and upper body West Slope style with vertical reeding in lower body, except ... 1947/02/19 |
| Articulated kantharos with biconical body. Upper walls straight, inclined. Lip tapered, outturned. Black glaze over all. One scraped groove at bottom of handle zone and one scraped groove just under lip ... 1947/02/16 |
Articulated kantharos with biconical body and angular carination set at approx. two-thirds the height of the body. Lower walls convex. Upper walls are inclined and have a profile with a compound curve ... 1947/02/16 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; high, wide lower with straight sloping side ending in beveled edge, upper a high, medium ... 1947/02/16 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; high lower with straight sloping profile ending in beveled edge, upper a high, very thin ... 1947/02/16 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; narrow, high lower with very short, straight sloping side ending in square edge, upper ... 1947/02/16 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to concave underside with nipple in center. Exterior of foot wheel grooved in two degrees. Biconical body with carination set at approx ... 1947/02/16 |
Articulated kantharos with flaring ring foot. Resting surface bevelled to somewhat deep concave underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body ... 1947/03/05 |
Articulated kantharos with slightly convex inclined upper walls. Lip outturned, rounded bevelled in. Black glaze over all. Miltos covered scraped groove just below lip. Side A: graffito in middle of handle ... 1947/03/03 |
| Articulated kantharos with flaring ring foot. Flat resting surface. Concave underside with nipple in center. Exterior of foot squared. Biconical body with angular carination set at approx. two thirds the ... 1947/02/15 |
| Articulated kantharos with flaring ring base. Resting surface bevelled to concave interior with nipple in center. Exterior of foot squared. Biconical body with rounded carination set at approx. two-thirds ... 1947/02/15 |
| Articulated kantharos with flaring ring base. Resting surface bevelled to concave interior with nipple in center. Exterior of foot has convex profile. Biconical body with angular carination set at approx ... 1947/02/15 |
| Articulated kantharos with biconical body. Angular carination set at approx. two-thirds the height of the body. Lower walls convex. Upper walls slightly convex, inclined. Lip straight, tapered. Two vertical ... 1947/02/13 |
| Flat medallion with scraped groove. In relief on the medallion, an eight-petalled rosette; on the calyx, long acanthus leaves; on the wall, Amymone, Dionysos, small Nike (?); on the rim, simplified guilloche ... |
Chytra. Bottom mostly missing; may be slightly flattened. Ovoid body with maximum diameter slightly below median at 0.047. Wheel mark at rim attachment. Flaring rim, slightly concave inside, with inward ... 1947/02/03 |
Chytra with ovoid body. Flaring rim, slightly concave on interior, with inward-beveled lip. Flange as rounded ridge; above it is in-line with the rim in places but distinct from it in others; below, in-line ... 1947/02/03 |
| Articulated kantharos with flaring ring base. Flat resting surface. Concave underside with large nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with angular ... 1947/04/02 |
| Bolster krater with foot in two degrees, flat resting surface. Deep body with flaring convex profile, horizontal outturned rim. 2 horizontal bolster handles just below rim, one pierced vertically in ... Hellenistic third-quarter third century B.C. |
| Cyma kantharos with stem foot, flat resting surface and convex undersurface, with molded exterior in two degrees; lower is wide with a horizontal top and straight sloping side ending in a beveled edge, ... 1947/02/06;1947/02/07 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; low lower with straight sloping profile ending in beveled edge, upper a medium thin ring ... 1947/04/20 |
| Kantharos. Garland-?-in added yellow below lip. Band of reeding on upper part of body. Leaf on upper part of handle
Redescribed: Wide flaring conical foot, narrow resting surface, conical underside. Ovoid ... |
| Shallow bowl with slightly concave bottom, 2 base rings, shallow echinoid body turning up to narrow rim, slanting in slightly from the vertical, round lip. GREdwards: "Delian". Bottom: faint rosette; body: ... Hellenistic |
| Flaring ring foot, rounded resting surface, interior of foot not articulated from nippled undersurface. Ovoid body with max. diam. below median; flaring rim, horizontal tapered lip. 1 vertical handle, ... 2nd cent. B.C. |
| Cyma kantharos with wide body, convex lower and concave upper narrowing towards a small, everted rim. West Slope style with vertical reeding on lower body bordered on top by single horizontal groove band, ... 1947/04/02 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to convex underside with nipple in center. Exterior of foot has convex profile. Biconical body with angular carination set at approx ... 1947/02 |
| Cyma kantharos with stem foot, flat resting surface and concave undersurface, with molded exterior in two degrees; wide lower with horizontal top and straight sloping side ending in tapered edge, upper ... 1947/02 |
| Articulated kantharos with flaring ring foot. Resting surface tapered to concave interior and flat underside with low nipple in center. Exterior profile of foot is wheel grooved in two degrees. Biconical ... 1947/02 |
| Cyma kantharos with stem foot, flat resting surface and concave undersurface, with molded exterior in two degrees; tall lower with straight sloping side ending in beveled edge, upper a medium-wide beveled ... 1947/02 |
| Articulated kantharos with flaring ring foot. Flat resting surface. Flat underside. Exterior of foot has squared profile. Biconical body with rounded carination set at approx. two-thirds the height of ... 1947/02 |
| Articulated kantharos with biconical body. Angular carination set at approx. two-thirds the height of the body. Lower walls convex. Upper walls are slightly concave, inclined. Tapered lip outturned. Two ... 1947/02 |
| Articulated kantharos with flaring ring foot. Resting surface flat. Interior of foot is concave with nipple in center. Exterior of foot has squared profile. Biconical body with angular carination set at ... 1947/02 |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to deeply concave underside with nipple in center. Exterior of foot has squared profile. Biconical body with rounded carination set ... 1947/02 |
| Articulated kantharos with flaring ring foot. Flat resting surface. Concave underside with nipple in center. Exterior of foot-has convex profile. Biconical body with rounded carination set at approx. two-thirds ... 1947/04/20 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; low lower with short, straight sloping profile ending in beveled edge, upper a beveled ... 1947/04/20 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; wide lower with straight sloping sides ending in beveled edge, upper a high, narrow ring ... 1947/03/10 |
| Articulated kantharos with flaring ring foot. Bevelled resting surface. Concave underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with carination ... 1947/03/11 |
| Articulated kantharos with flaring ring foot. Bevelled resting surface. Concave undersurface with sharp nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with ... 1947/03/10 |
| Bowl. Just below lip on exterior is a band of irregular blobs in added yellow, and below this a band of ivy leaves, vine incised, leaves added in yellow. A lug handle on each side below lip, vertically ... 1947/12/23 |
| Kantharos with high ring foot in two degrees with wider, lower echinoid element and upper disk-shaped element atop which is short concave stem. Body in two degrees: lower section is ovoid and high-shouldered; ... 1st half 3rd c. BCE (GRE) |
| Articulated kantharos with flaring ring foot. Resting surface bevelled to concave interior with nipple in center. Biconical almost globular body with rounded carination set at approx. two-thirds height ... 1947/12/23 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; wide lower with straight sloping sides ending in beveled edge, with single groove running ... 1947/12/22
1947/12/23 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; narrow lower with straight sloping side ending in a high beveled edge, articulated from ... 1947/12/23 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; high, narrow lower with straight sloping side ending in high beveled edge, articulated ... 1947/12/23
1947/12/23 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; high, narrow and almost vertical lower with a beveled edge, articulated from high, wide ... 1947/12/23
1947/12/22
1947/12/23 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; high lower with straight sloping side ending in a high beveled edge, articulated from ... 1947/12/23 |
| Kantharos. incised design below lip: Heavy groove at level of lower attachment of handle. Small satyr masks on top of handles.
(redescribed-typed on back of card))Articulated kantharos with stepped ring ... 1947/12/23 |
| Articulated kantharos with flaring ring base. Resting surface tapered to convex interior with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with angular carination ... 1947/12/23 |
| Pottery Typ: 26 Relief Ware Moulded relief bowl of conical form with a flat bottom and a wheelmade rim thickened slightly at lip. Medallion is surrounded by at least one circle. A ircle around the lower ... Between 150-146 B.C. |
| Black glazed kantharos with west slope and thorn decoration. Tall cup with moulded splayed foot, hollowed out in conical form on underside and with a deep bowl rising in conical shape to maximum diameter ... Down to 146 B.C. |
Echinus bowl with low, slightly flaring ring foot, flat undersurface, deep conovex body, inturned rounded lip. Opaque porous glass paste or frit, mottled brown and bluish green on parts of surface. Complete ... Context 146, profile poss. 4-3rd c. BC |
| Bowl. Convex ring foot with flat resting surface and flat undersurface. Body rises with flaring walls in steep convex profile, to outturned rim, triangular in profile. Lustrous black glazed inside and ... 1948/01/15 |
| Chytra with rounded bottom, ovoid body with maximum diameter slightly below median at 0.053. Deep wheel groove at rim attachment. Flaring rim, concave on interior, lip beveled inwards and with a smaller ... 1948/01/15 |
| Articulated kantharos with flaring ring foot. Flat resting surface, concave underside with nipple in center. Exterior of foot has profile wheel grooved in two degrees. Biconical body with angular carintaion ... 1948/02/09 |
| Cyma kantharos with stem foot, flat resting surface and conical undersurface, with molded exterior in two degrees; low lower with straight sloping profile ending in beveled edge, upper a medium thin ring ... 1948/02/09 |
| Chytra with round bottom and ovoid body with greatest maximum diameter just below median 0.051. Slight indentation where rim meets body. Outward flaring rim, concave to flange; lip beveled inwards. Flange ... 1948/02/05 |
Chytra with round bottom, ovoid body with maximum diameter below median at 0.053. Wheel groove at rim attachment. Flaring rim, nearly vertical, concave inside, with rounded lip. Flange slight; above as ... 1948/02/04 |
| Figural lug of large brazier. Imported. On exterior, vertical body rounds off into flat, horizontal rim, which rounds off again and continues vertically as back of figural lug. On interior, figure sits ... 1948/05/12
1948/05/12 |
| Beard and lower face of figural lug of brazier. Imported. Traces of burning on beard and nose of figure. Relief design of bearded head. Beard defined by four deep grooves that extend downward from lower ... 1948/01/15
1948/01/15 |
| Acrocorinth kantharos. Foot in two degrees with flat resting surface; short stem. Deep rounded bottom rising to almost vertical sides, tapering in to narrow, outturned rim with horizontal, rounded lip ... Latter 3rd quarter, according to Corinth 7.3 |
|
|
